This is the GWS EP easy build ARF Slow Stick Park Flyer
with the EPS300C power system
For Beginner to Intermediate Modeler/Fliers.
Fuselage: Fiberglass channel Wings: One-piece foam construction Landing Gear: Pre-bent one piece wire with two 76.2mm diameter wheels
and one 25.4mm diameter tail wheel and tail skid wire.
Hardware: All necessary hardware included Motor and gearbox with preinstalled plastic mount Can be constructed with a removable tail also as a glider Warranty: GWS guarantees this kit free from defects in both materials and workmanship at the date of purchase
Fiberglass fuselage channel, EPS-300C motor system, EP-1180 prop,
main landing gear, tail skid wire, main wheels (76.2mm), tail wheel
(25.4mm), spinner, rubber bands, all necessary hardware and
REQUIRES Speed Control/Auto-cut-off
Battery 2/3 AA cells 270-400mAh or AA cells 600mAh 7.2V
Charger: Timed or peak for 2/3 AA cells
Radio: 2-4 Channel
(2-channel for glider)
Servos: 2 Naro,Micro,or Mini servos
Misc. Items: Building and field equipment.
Required for removable tail units in addition to the above is a
electric drill,hacksaw and 1mm drill bit.
Wingspan: 46.3"(1176mm) Wing Area: 505.9sq in (32.64 sq dm) Weight: 11.9-15.5 oz(338-440 grams) Wing Loading: 3.39oz/sq ft (10.3g/sq dm) Length: 37.6" (954mm) Center of Gravity: 4-1/8" (105mm) back from the wings leading edge CG for Glider Version: 2½"-3¾" (65-95mm) from the wing's
leading edge dependent on wind conditions.
Elevator: Up & Down 20°
Rudder: Right & Left 35°
This is the version that includes the EPS300C power system with the EP-1180 prop.
|Phil's Hobby Shop
3938 W Jefferson Blvd
Fort Wayne, IN 46804
10:00–8:00 Mon, Wed, Fri
10:00–6:00 Tue, Thu, Sat
Local time: 3:17 AM
|Contact Phil's Hobby Shop|
Phone: (260) 424-0065
10:00–5:00 Mon–FriE-mail: Compose
Arts & Crafts
Copyright © 2013 Leisure Time Inc.
All Rights Reserved.